1054 MTP 1007/2W/STD - Twin wires penetration test equipment

Back to

Twin wires penetration test  equipment, guided drop method, complete  mechanical parts with base, electric plant included, pillar frame, standard version.

  • Equipment suitable for testing according to the following standards SNELL M 2010 , AS , JIS , IS and other standard using guided drop head method;
  • Single column steel frame ( made by square mm 120 X 120 X 5 steel pipe  ) supporting the plate holding the wires  ,  with high thickness ( 30 mm ) base;
  • Aluminium protection cage , up to height of 2,2 meters made by 40X40 Aluminium Item beams  with polycarbonate transparent 3 mm thickness  panels;
  • Steel and concrete base dim. mm. 860 X 860 X 600 weighting 800 Kg around;
  • Automatic operated protection doors , with frame made by aluminium ( with two pneumatic cylinders ) with transparent polycarbonate protection sheets;
  • Twin wires driving system using 3 mm C70 cables , device to keep the wires under constant tension by means of spring washers  with upper and lower fixing system;
  • Frame fixed to the base by means of 8 bolts , thread 18 mm;
  • Drop carriage made by Ergal 70 ( water jet cut and anodized ) with 4 low friction nylon guides easy removable .The carriage is provided with a central thread to which different penetrators can be fixed .The carriage has a total mass of grams 2.700;
  • Penetrators supplied : Cone 60° height 40 mm ( Snell/DOT ) Cone 60°for JIS , hammer of 300 grams for ECE 22/05 and some EN . Vertical pivot supporting horizontal arm with penetrator of 300 grams for testing visors ECE 22/05 and some EN;
  • Lift carriage with pneumatic releasing system and limit switches actuated by IR photocells;
  • Different headforms and mountings can be supplied : 4 positions mounting ( 0 , 30° , 60° , 90°) with aluminium headforms for Snell and DOT – ball joint with clamp for some EN – fixed angle mountings  for EN 12492 and other with headforms provided with central socket – Wood headform with central soft metal insert EN 397 – other mountings are available up on request;
  • Electronic contact detector with light and sound;
  • Automatic hooking system of the drop carriage , during the descent;
  • Electric winch with pulley and encoder to be driven with inverter technology;
  • Complete electric plant inside the frame columns;
  • Complete pneumatic plant with filter and pressure gauges;
  • Speed control device with ultra  high frequency infrared photocell ( 100Khz );
  • Mechanical parts finishing :  zinc plated and anodized;
  • Input and output connections , to DLS or other driving devices , by means of 24 poles single plug;
  • Overall dimensions with base  mm . 860 x860 x5500;
  • Weight 210 kg without base.